Silicone Rendering services by experienced professionals
Home › Silicone Rendering
Silicone Rendering — Rendering Specialists

Silicone Rendering: Professional Exterior Render Systems

Professional silicone rendering from a local team. Fully insured specialists, free no-obligation quotes, fast response.

Free Quote
Fully Insured
Specialist Finish
5★ Service
☎ Call 07588 418550

Free Quote — Silicone Rendering

Fast response — no obligation

🔒 Secure. No spam. Reply within 24 hrs.

6yr+Experience
100%Insured

Silicone Rendering: Professional Exterior Render Systems

Silicone rendering gives properties a clean, durable, low-maintenance exterior finish that holds its colour and resists moisture far better than traditional sand-and-cement renders. City Renderers has been delivering Silicone rendering for 6 years, working across residential and commercial properties with a team holding CSCS and CITB cards and K Rend accreditation. Every project is backed by our 10-30 Years Coating warranty, so you're not just getting a fresh finish — you're getting one built to last.

If you manage a property and need a finish that won't fade, crack, or need repainting every few years, Silicone rendering is worth a serious look. Get in touch to book a free site visit and we'll assess your property's suitability at no cost.

What Is Silicone Render?

Modern silicone render systems represent a significant step forward from older cement-based finishes. The core material is a pre-mixed polymer-modified render that contains silicone resin — that's what gives it water-repellent, self-cleaning properties that older renders simply can't match.

Rain water beads off the surface rather than soaking in, which dramatically reduces the risk of damp penetration, algae growth, and staining over time. The silicone polymer also gives the finished coat a degree of flexibility, allowing it to expand and contract with the building's natural movement without cracking.

Unlike traditional render, silicone systems are mixed with pigment throughout — so the colour runs all the way through the coat. There's no surface paint to peel or chip. The finish stays consistent year after year without repainting, which is why the manufacturer warranties on these systems can run so long.

Our Silicone Rendering Services

City Renderers applies silicone render systems to a wide range of property types — from single houses to large commercial facades. Every project begins with a thorough surface assessment, proper substrate preparation, and a written specification before any material goes on the wall.

Silicone Render

The standard silicone render coat is applied over a prepared substrate — either an existing sound render base or a newly applied base coat — to a typical thickness of 1.5mm to 2mm. Fine, medium, or coarse grain finishes are chosen at specification stage depending on the look you want and the condition of the substrate underneath.

This is the most common application on residential properties: houses, bungalows, and flats where the existing render is sound but aged, faded, or stained.

Render Silicone for Commercial Facades

Commercial buildings present different challenges — larger surface areas, working at height, access logistics, and often a need to work around business operations. Our team is experienced in managing render silicone applications on:

  • Warehouses and industrial units
  • Office buildings and business parks
  • Retail units and shopfronts
  • Hospitality venues and hotels
  • Schools and educational facilities
  • Healthcare buildings

Every commercial job gets a dedicated project plan covering access, sequencing, and sign-off stages so property managers and facilities managers know exactly what happens and when.

Silicone Coloured Render

One of the biggest practical advantages of silicone systems is the colour range. Hundreds of pre-mixed shades are available — from traditional off-whites and creams through to bold contemporary tones, and because the pigment is integrated into the mix, the colour is consistent, UV-stable, and long-lasting.

  • Wide colour palette to match any design brief
  • UV-resistant pigment, no bleaching or fading over time
  • Consistent finish across large surface areas
  • No future repainting required under normal conditions

If you're refreshing a retail unit, rebranding a commercial building, or simply updating a tired exterior, coloured silicone render delivers a result that genuinely holds.

Coloured Silicone Render Application

Selecting the right colour and grain is only part of the specification. Proper application requires:

  • Thorough substrate cleaning and repair before any render is applied
  • A compatible base coat where the existing surface requires it
  • Correct mixing and consistent trowel pressure throughout
  • Careful management of joins to avoid lap marks on large elevations

City Renderers uses K Rend silicone systems as standard on most projects, a specification we're accredited to apply correctly.

K Rend Silicone Render

K Rend silicone render is one of the leading factory-produced silicone render systems available in the UK, and City Renderers holds K Rend accreditation. This means we're trained and assessed to apply K Rend products to the manufacturer's specification, which is a prerequisite for the product warranty to be valid.

The silicone range includes through-coloured fine and scraped finishes suitable for most residential and commercial substrates. Applied correctly, K Rend silicone systems provide excellent weather resistance, minimal maintenance requirements, and a clean, sharp finish.

If your project specifies K Rend or if you want the security of a manufacturer-backed installation, City Renderers can deliver it.

Thin Coat Silicone Render

Typically applied at 1.5mm, thin coat silicone render is suited to properties where the substrate is in good condition and a lightweight, flexible finish coat is needed rather than a full render build-up. It's commonly specified on insulated external wall systems (EWS) and on properties where additional wall thickness needs to be minimised.

  • Lightweight and flexible, suitable for EWS substrates
  • Fast application over prepared, even surfaces
  • Full colour range available as standard
  • Compatible with most silicone base coat systems

Even thin coat systems require the same level of substrate preparation as thicker applications; skipping prep is where render failures start, regardless of the product used.

Silicone Rendering work by a local team

Professional vs DIY Approach

Professional ApplicationDIY Application
Finish QualityConsistent texture and colour across the full elevation, managed by experienced applicatorsVariable, difficult to achieve even texture and avoid lap marks without training
Coverage UniformityControlled by specification and technique, with consistent coat thickness throughoutDepends on applicator skill; uneven coverage is common and visible at distance
Application MethodMachine or hand applied to manufacturer specification, with correct timing between coatsHand applied, typically without timing controls or specification compliance
Preparation RequiredFull substrate assessment, repair, cleaning, and priming before any render is appliedOften underestimated; inadequate prep is the most common cause of render failure
Suitability for Commercial ScaleFully suited, team can manage access, sequencing, and phased completion on large elevationsNot practical for large or complex facades; access equipment and logistics require specialist management
Typical Use CasesResidential houses, commercial facades, industrial units, schools, retail and hospitality propertiesSmall patch repairs on existing sound render only, not whole-elevation application

Our Silicone Rendering Process

City Renderers follows a consistent process on every project. The steps below cover a typical whole-elevation installation, from first contact through to completion.

  • Site Visit and Assessment, We visit the property to assess the existing substrate, identify any areas of failure, damp, or movement, and establish what preparation is needed before render can go on. This visit is free and carries no obligation.
  • Written Specification and Quote, You receive a written quote detailing the scope of work, the materials being used (including the K Rend system where applicable), the preparation required, and the project timeline. No verbal estimates, everything is in writing.
  • Substrate Preparation, This is the stage that determines how long the render lasts. We clean the substrate, cut out and repair failed areas, apply bonding agents where required, and prime the surface to manufacturer specification. No shortcuts.
  • Base Coat Application, Where the substrate needs it, we apply a compatible base coat and fibreglass mesh reinforcement to create a stable, consistent surface for the silicone finish coat. On properties where the existing render is sound, this stage may not be required.
  • Silicone Finish Coat, The chosen silicone render, whether K Rend or another specified product, is applied to the correct thickness and texture in a single continuous operation across each elevation. Joins and reveals are carefully managed to avoid visible lines.
  • Inspection and Sign-Off, Once the render has cured, we carry out a final inspection against the written specification. Any remedial work is completed before we consider the project closed.
  • Warranty Issue, Eligible projects receive documentation for the 10-30 Years Coating warranty. We walk you through what this covers and what maintenance (if any) is expected from you.

Frequently Asked Questions

What is silicone render and how does it differ from traditional render?

Silicone render is a factory-produced, polymer-modified render system that contains silicone resin as a key component. The silicone gives it water-repellent, self-cleaning properties that traditional sand-and-cement renders lack entirely. It's also pre-pigmented, so the colour runs through the material rather than sitting as a painted surface on top. Traditional render needs painting and ongoing maintenance; silicone render does not.

How long does Silicone rendering take?

Project timelines depend on the size and condition of the property, the preparation required, and access logistics. A single-elevation residential project typically moves faster than a multi-elevation commercial facade that needs access equipment and phased sequencing. City Renderers provides a clear project timeline as part of every written quote so you know what to expect before work starts.

How much does Silicone rendering cost?

Every project is quoted individually. Costs depend on surface area, substrate condition, preparation required, system specification, finish choice, and access. There is no fixed per-metre rate because no two properties present the same substrate or preparation challenge. Book a free site visit and we'll provide a detailed written quote with no obligation.

What properties is silicone render suitable for?

Silicone render systems are suitable for most masonry substrates, brick, block, existing render, and insulated external wall systems, provided the substrate is structurally sound and properly prepared. City Renderers works on residential houses and a wide range of commercial properties including offices, retail units, industrial buildings, schools, and healthcare facilities. If you're unsure whether your property is suitable, the site visit will confirm it.

Does Silicone rendering come with a warranty?

Yes. Projects completed by City Renderers to the correct specification are backed by our 10-30 Years Coating warranty. The exact term depends on the system used and the application specification. Full warranty documentation is provided on completion of eligible projects.

Do I need K Rend specifically, or will any silicone render system do?

K Rend silicone render is one of the leading systems available and City Renderers is K Rend accredited, meaning we're trained and assessed to install it to the manufacturer's standard, which is required for the manufacturer warranty to apply. Other silicone systems are available and may suit specific projects. We'll recommend the right system for your substrate and specification during the site visit.

What preparation does my property need before Silicone rendering?

The preparation required depends entirely on what we find during the site assessment. At minimum, the substrate needs to be clean, structurally sound, and free from active damp or movement. Failed areas of existing render need to be cut out and rebuilt. On properties that need a base coat, fibreglass mesh reinforcement is applied before the silicone finish coat goes on. Preparation is the single most important factor in how long the render lasts, it's never skipped.

Expert silicone rendering work

What Sets City Renderers Apart

Choosing the right contractor for Silicone rendering matters as much as choosing the right product. Here's how City Renderers approaches every project:

  • 6 years of focused rendering experience, not general building work. Rendering is what we do.
  • CSCS-carded operatives and CITB-registered, every person on site carries the right credentials.
  • K Rend accredited, we're assessed and approved to install K Rend systems to manufacturer specification, which matters for warranty validity.
  • Written specifications on every project, you see exactly what system, what preparation, and what timeline before you commit.
  • 10-30 Years Coating warranty, issued on eligible projects, with documentation provided on completion.
  • Free site visit with no obligation, we assess your property before quoting so the number you receive reflects the actual scope of work.

We don't provide verbal estimates or ballpark figures over the phone. Every quote City Renderers issues is written, itemised, and based on a physical site assessment.

Areas We Cover

City Renderers covers a wide range of locations. View the full list of areas we cover to check whether your property falls within our working area.


Book a Free Site Visit Today

Silicone rendering is a long-term investment in your property, one that pays back through decades of low maintenance and a consistently sharp exterior finish. City Renderers backs every eligible project with a 10-30 Years Coating warranty, applied by a CSCS-carded, K Rend-accredited team with 6 years in the trade.

Book a free site visit and we'll come to your property, assess the substrate, and provide a full written quote within 24 hours of the visit. No obligation, no verbal guesswork.

Book a free site visit today or find out more about City Renderers before you get in touch.


Request Your Free Quote, not ready to commit to a site visit yet? Use our quote form and tell us about your property. We'll come back to you within 24 hours with initial guidance on what's involved.

Last updated: 11 October 2026